Spa Purge attacks the root cause of most spa maintenance problems, the build-up of non-living organic waste contamination! Non-living organic contaminants such as; oils, lotions, cosmetics, hair products and sweat build-up in spa water produces waterline rings, cloudiness, clogged filters, unpleasant odors and foaming. These non-living contaminants collect and build-up in your spa, circulation system, and filter. By purging the spa of this non-living organic build-up, the symptoms of contamination will be reduced or eliminated.
Directions for use:
1. Remove cartridge filter elements
2. With spa water temperature at 95 degrees or higher, add entire contents of 1LSpa Purge bottle to spa water
3. Run jets a minimum of 5 minutes. (Note: if excessive foaming occurs, turn jetsoff)
4. Maintain water temperature and allow spa to circulate overnight with jets off
5. Drain, rinse and then re-fill spa and re-install filter elements. Proceed withnormal spa maintenance
Note: For jetted tubs, use 1/2 bottle of Spa Purge
